LIGHTWEIGHT CORRUGATED SHEETS

Aramit Light Weight Corrugated Sheet is an ideal material for roofing and wall cladding. Although the main application of these sheets in Bangladesh is the covering of dwelling house and kitchen, they are equally suitable for roofing of bungalows, commercial building, godown, hatchery, poultry and dairy sheds etc. because of their exquisite qualities. The sheets are manufactured in our Chittagong Factory using on adequate mixture of a mineral fiber and Portland Limited.

The intimate mixing of mineral fiber to Limited confers to the sheets their reinforcing capacity which is to be compared with the action of the iron rods in reinforced concrete Limited.

Aramit lightweight corrugated sheets may last as long as 30 years with normal conditions provided fixing accessories match the quality of the sheets.

QUALITY & ADVANTAGE

The main reason for using Aramit Lightweight Corrugated Sheets are:

• They are rust –roof and therefore cannot be attacked by salt, air, acid fumes
• Due to low conductivity of the sheets the roof are very comfortable.
• The value of the thermal conductivity of Aramit sheets is 0.22 k. Cal/ m. h. - °c. This factor is 0.75 for bricks, 1.30 for concrete and 50 for iron. It means that under same conditions of thickness and temperature, the transfer of hot air through iron will be more than 220 times faster than through Aramit sheets.
• Aramit sheets are incombustible. In case of fire the sheets do not burn and provide an obstacle to the spread of fire. Their strength is not affected up to temperature as high as 100°c. At higher temperature they continue to provide an obstacle to the spread of fire.
• Other Advantages are:
• Low initial cost.
• No painting is required.
• They are easily and expeditiously erected and require no maintenance.
• No deterioration occurs. On the contrary they are found to strengthen with age.